BL-CH4 400
BL-CH4 400
Long-Range TDLAS Methane Detector

From large oil and gas terminals to pipeline routes, the BL-CH4 400 helps inspection teams identify methane anomalies and prioritize follow-up checks. Circular scanning broadens coverage, while a detection distance of up to 300 m enables remote screening of equipment and infrastructure. A 5 ms response time and 1 ppm·m sensitivity support rapid inspections using DJI Matrice 350 RTK or Matrice 400 platforms. Operators can view live readings through CH4 Assistant and review recorded findings in CH4 Cloud, connecting aerial screening with targeted field verification.

Up to 300 m Detection Range
The BL-CH4 400 offers a choice of detection ranges, with methane detection at distances of up to 300 m. This allows operators to screen large facilities and inspect equipment that is difficult to approach.
Ring Scanning
Ring Scanning sweeps the laser in a circular pattern to take readings at multiple points around the target. This helps operators check areas with several potential leak points, such as valve assemblies and flanged connections.
Precise Leak Source Localization
A built-in reference gas cell enables automatic calibration to help maintain measurement accuracy. When scanning an area with elevated readings, operators can use the calibrated data to narrow down and locate the suspected leak source.
IP55 Protection for Demanding Environments
The BL-CH4 400 has an IP55 rating and an operating temperature range of −20°C to 50°C, with operating humidity specified at <95% RH at +25°C. It supports methane inspections in hot and cold conditions and at offshore sites exposed to strong winds.
*Test results reflect the conditions tested. Field measurements may vary with wind, temperature, and other site factors.
Custom Platform Integration
The BL-CH4 400 supports custom integration with a range of large carrier platforms, including industrial drones and quadruped robots. The mounting configuration can be tailored to the carrier and inspection task for aerial or ground operations.
| Model No: BL-CH4 400 |
| Product Name: TDLAS Methane Detector |
| Supported Platforms: DJI Matrice 350 RTK/M400 and customization |
| Interface: X-Port |
| Gimbal: 3-axis stability enhancement (Pitch, Roll, Yaw) |
| Rotation Range: Pitch:+30° to -95° ; Roll: ±60° |
| Working Principle: TDLAS |
| Detection Range: 150m/300m (Test Conditions: 90% diffuse reflectivity targer; 15,000 ppm·m methane concentration, static level detection) |
| Concentration Range: 20~99999 ppm·m |
| Accuracy: +10% (100~50000 ppm·m) |
| Sensitivity: 1 ppm·m |
| Response Speed: 5ms |
| IP Rating: IP55 |
| Infrared Detection Laser: Class 3R (Avoid direct eye exposure) |
| Green Indication Laser: Class 3R (Avoid direct eye exposure) |
| Working Temperature: -20°C to 50°C |
| Working Humidity: <95% RH (+25°C) |
| Size(L*W*H): 176*129*163 mm |
| Weight*: 770g (with gimbal) |
| Power Consumption: 2W |
| Video Resolution: FHD (1920 x 1080) @30 fps |
| Calibration: Built-in gas cell for automatic calibration |
| Camera: 13MP |
The sensor comes in 150 m and 300 m detection range versions.
Supports DJI Matrice 400 and Matrice 350 RTK. Ensure the aircraft and remote controller are updated to the latest firmware.
Custom integration is available for other brands.
Rated at IP55.
This rating is achieved under controlled laboratory conditions according to IEC 60529. Protection may degrade over time due to wear or prolonged use.
Supports Gimbal Slot 1 on the DJI Matrice 400.
Mounting on other slots may prevent video streaming.

The minimum focusing distance is 0.25 m.
Targets closer than 0.25 m may appear blurred in the image, but this does not affect methane detection accuracy.